Feature
●Dimensions: 200 x 50 cm; total coverage: 1 m²
●Use of a high-quality and strong material with a thickness of 2.2 mm (harmless butyl rubber + synthetic polymer material). With the increased thickness of 2.2 mm, the insulation mat has stronger vibration resistance than other products on the market. 2 m x 0.5 m (L x W) (1 m²)
●High adhesive strength, in hot summer, the adhesive does not become soft, in winter no degumming (at 120°C for 50 hours without displacement and flow)
●Our products are free from bituminous ingredients, have no powder and smell, are safe to use. Other bituminous adhesives on the market are very toxic to the human body and stink
●Ideal for speaker insulation, structure-borne sound insulation, vehicle insulation
[4m]
[2m]
Description
Product description:
1 square metre insulation mat.
50 x 200 cm (2 m roll).
The insulation mat uses high-quality and strong butyl and aluminium materials. The weight per unit area is about 4 kg / 1 m². It can be used for attenuation, sound insulation, improve sound quality, body seal, speaker insulation and structural noise isolation.
Improvement after upgrade!
1. The properties of water resistance and environmental protection are ideal for vehicle insulation.
2. The insulation mat made of multi-layer high-quality thermal insulation materials with a thickness of 2.2 mm (butyl rubber + synthetic polymer materials) has a high adhesion (at 120°C for 50 hours without displacement and flow), in hot summer, the adhesive does not become soft, in winter no degumming.
3. No smell: butyl rubber burns without irritating smell, it is white ash after complete combustion, when it burns asphalt rubber, there is strong irritating smell.4. Sheet reinforcement:
The door no longer flaps and effectively protects the body.
1. Decide which part of the vehicle you want to start from: floor, roof, door, boot or bonnet, etc. We recommend insulating all parts as much as possible.
2. If the insulation material of the vehicle itself is damaged or not properly attached, please remove the residue of the insulation material. If the insulation is still in good condition, you can leave it there.
3. We recommend wearing gloves while working and ventilating the room from time to time. Carefully use scissors or a cutter knife to cut. No special tools are required. Thin aluminum foil cuts by itself. Please note this during processing.