Features:
This is a great DC to DC up power supply module for electrical equipment, digital products, etc.
Input and output are with screw terminals for convenient wire connection and separation.
There is a heat sink on board which ensures better heat dissipation.
Designed with USB and 2.5A large current output, can detect resistance and charge multiple phones at the same time.
It can also be used as a power supply for laptops or voltage regulator for solar panels.
Specifications:
Input voltage: 3V-35V.
Output voltage: 5V-45V Input current: 5A (peak).
Voltage display range: 5V-30V (if the input voltage is lower than 4.5V, it will not be displayed).
Voltage display error: +/-0.1 V.
Size: 72 x 48 x 16 mm.
Note:
1. This is a boost module, so the output voltage should be higher than the input voltage.
2. The peak output current is less than 5 A.
3. This kit requires professional knowledge and skills. Please make sure you know how to use it.
Instructions:
1. Connect the module to the power supply (4.5-40V), the input indicator lights up and the module works normally.
2. Adjust the blue potentiometer knob (usually turn clockwise to increase and turn counterclockwise to down) and check the output voltage with a multimeter until it meets the requirements.
3. If the output voltage of the module cannot be adjusted, wh I means that it is equal to the input voltage, please turn the potentiometer for multiple circles counterclockwise, then the voltage can be adjusted normally.
Package includes:
1 x boost module.