Feature

●[AD8317 Chip Design]: The product is designed using an AD8317 chip to detect RF signal power.
●[Good Performance]: Can detect the power of an RF signal in -55dBm to -0dBm, converting the RF signal into a DC output
●[Detected signal range up to 55 dB]: The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, extending the dynamic range of the detected signal whose ranges reach 55 dB.
●Widely used: it can be widely used in the detection of high-frequency signals, measuring signal power and detection of ambient field strength, and can also be used as part of automatic gain control and automatic level control.
●[100% Absolutely Satisfaction Guarantee]: If you have any problems or suggestions about this product, please feel free to contact us by email. We will certainly provide you with a satisfactory solution and never let you suffer any losses.


Description

Features:

- The product is designed using an AD8317 chip to detect RF signal performance.

- Can capture the power of an RF signal in -55dBm to -0dBm, so that the RF signal is converted into a DC output.

- The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, extending the dynamic range of the captured signal whose range reaches 55 dB.

- It can be widely used in detecting high-frequency signals, measuring signal power and detecting field strength in the environment.

- It can also be used as part of automatic gain control and automatic level adjustment.

Specifications:

Operating frequency: 1 m - 10000 MHz.

Measuring power: -55 dBm to -0 dBm

Output Voltage: 0.33-1.65V

Detection gradient: -22 mV/dBm (typical value).

Input impedance: 50Ω

Supply voltage: 7-15 V.

Size: as shown in the picture.

Weight: 7 g.

Package includes:

1 x Logarithmic RF detector.