Feature

●Unassembled, variety mount methods, you can make flexible use.
●PCB: FR-4 fibre glass PCB, dual copper layers, size 120 mm x 78 mm. Pads grid / pitch 2.54 mm / 0.1 inches, hole diameter 0.8 mm. Terminal block pitch 3.5 mm / 0.138 inches, hole diameter 1.2 mm.
●Terminal block: pitch 3.5 mm / 0.138 inch mini terminal blocks, total 84 pins (3pole x24pcs, 2pole x6pcs). Wire range 26 ~ 16 AWG, strip length 5 mm, screws M2 steel, pin header and cage brass.
●Female header socket: pitch 0.1 inches/2.54 mm, pin length 15 mm/0.59 inch single row 10 pin x1pcs, singal row 8 pin x 5pcs, dual row 18 pin x1pcs.
●Note: This is not an original Arduino product. It is only a substitute accessories from DollaTek


Description

DollaTek Prototype Screw / Terminal Block Shield Board Kit for Arduino R3


The kit includes prototype PCB, terminal blocks, female header sockets.
Unassembled, variety mounting methods, you can make flexible use.

PCB:
FR-4 fibre glass PCB, dual copper layers, size 120 mm x 78 mm.
Pads grid / pitch 2.54 mm / 0.1 inches, hole diameter 0.8 mm.
Terminal block pitch 3.5 mm / 0.138 inches, hole diameter 1.2 mm.

Terminal block:
Pitch 3.5 mm / 0.138 inch mini terminal blocks, total 84 pins (3 pole x 24 pieces, 2 pole x 6 pieces).
Wire range 26~16AWG, strip length 5 mm, screws M2 steel, pin header and cage brass.

Female header socket:
Pitch 0.1 inches/2.54 mm, pin length 15 mm / 0.59 inches.
Single row 10pin x 1pcs, singal row 8pin x 5pcs, dual row 18pin x 1pcs.


Note: This is not an original Arduino product. It only a substitute accessories from DollaTek.

Package includes:
1 x DollaTek PCB board.