grinding

Sanding discs: There are four different types of sanding discs in this rotary tool accessory set, ideal for many types of surfaces such as: soft and hardwood, chipboard, fibreboard, non-metals, plastic, cork, rubber, minerals.

Sanding belts and fan sanders are used for sanding and shaping wood, plastic, fibreglass and for easy deburring.

Sanding drums fit any brand of sanding belts.

This sanding accessory will take care of your surface preparation and processing.

Cleaning and polishing

Felt wheels and fabric wheels, perfect for various shapes, electronics, glass, medical devices, gold, silver jewellery and metal surface grooves.

Brass brush has a high elasticity and high temperature resistance, it can easily remove rust, paint, dust and burrs on metal and wood surfaces, smooth sweat splashes.

Rust-proof brush suitable for cleaning metal surfaces, grinding, dedusting, deburring, polishing, removing residue.

PP brush is used for cleaning and polishing fragile surfaces.

Carving and engraving

HSS cutter with a hardness of hrc60 upwards after heat treatment for carving, hollowing, grooving, and polishing on wood and plastic.

The diamond drill bit is ​used for detailed work, engraving, touch-up and finishing. It is used on ceramic, tiles, brick, glass, plastic, fibreglass, jade, steel and wood and other hard materials. Make sure you place it in water to cool, as dry drilling graphitises the diamond head quickly when overheated.

drilling

HSS twist drill bit perfect for wood, soft metals, soft metals, fibreglass and also suitable for plastic, walnut, amber, beads, beeswax, olive nut and small kit etc. Thanks to the different shapes, it is suitable for almost all grinding conditions.

Grinding & Sharpening

Green silicon carbide grinding disc is suitable for grinding crushed glass, ceramic tiles and high-strength metals.

Aluminium oxide sanding disc for grinding, deburring, chamfering carbon steel, high-speed steel and hardened steel, etc.

cutting

Cutting discs for separating sheet metal, thin woods and plastics.

Fibreglass reinforced cutting discs ​For cutting frozen screw heads or screwing or for framing rusted slots.

Diamond cutting disc is specially designed for glass, ceramic, jade, floor tiles.

Sanding Drum Kit

Align the grinding drum and the band, then press the tape into the drum and finally use the small wrench in the kit to turn the drum screw.

Tear off the white paper of the sandpaper, then align the sandpaper with the sanding pad.

The wrench is used for unscrewing, attaching clamping nut and mandrel as well as for changing accessories.

arbor

The mandrel with red plastic disc is used to hold the cutting discs, sanding discs and sanding discs.

The pin with silver metal disc is for fabric wheel.

The pin with screw is for felt wheels.

collet

The collets are made of tin bronze, which has a high toughness and wear resistance, so that the collets are more durable than normal copper collets.

2 x 3.2 mm, 1 x 2.4 mm and 1 x 1.6 mm collet set for adjusting a variety of accessories with different shaft sizes to your rotational tool.