Feature(may vary by option.)
●Product 1: 2 Pin Right Angle 6.35mm Jack Plug Nickel Plated Contacts Nickel Housing
●Product 1: Metal housing improves resistance and protection against high frequency interference
●Product 1: Extra narrow 1/4 inch jack plug for high plug-in density
●Product 1: Precisely milled, one-piece contacts prevent the tip contact from getting stuck in the socket
●Product 2: Neutrik NP2X professional 6.35 mm jack plug 2 pin.
●Product 2: nickel-plated contacts, nickel housing
[1 Bundle with jack plug]
[1 Single]
Description
Neutrik NP2RX 6.3 mm angled jack mono
The rugged professional telephone plug series enhances the design of the existing C series by providing the thinnest A-gauge connector available with unique Neutrik chuck type strain relief on the market. The slim 14.5 mm wide case meets the latest requirements for high density jackfields (15.88 mm jack). The precisely machined one-piece tip contact without rivets makes it unique and avoids hooking into a socket or breaking off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixers. 1/4" Professional Right Angle Telephone Plug 2 Pin Nickel Contacts Nickel Housing
Neutrik NP2X jack plug, nickel-plated contacts, nickel housing, 2 pin, 6.35 mm
The X Series is a further development of the proven C series. The new slim jack plugs are the thinnest plugs with Neutriks collet strain relief and allow an installation distance of just 15.88mm. Rated current: depends on the plug pairing. Continuity resistance: depends on the plug pairing. Insulation resistance: initial: > 2 G ohms. Insulation resistance: after moisture test: >= 1 G ohm. Dielectric strength: 1 kV dc. Connection type: solder contacts conductor cross section: 1 mm²/18 AWG cable diameter: 4 - 7. Solsolsolsolsolability: corresponds IEC 68-2-20 Housing: znAl4Cu1, nickel or black-chrome-plated insulation: pA 6.6 30% GR (glass fibre reinforced) contacts: cuZn39Pb3.2 µm Ni (Su) or gold plated strain relief clip: polyamide PA6 kink protection: pOM temperature range: -20 °C to + 65 °C.