Feature

●This stepper motor has five wires and four coils. The central connections of the coils are connected to each other and are used as a power connection.
●Stepper motor with standard assignment (for direct connection). The four LEDs (A, B, C, D) on the driver board signal the current operating status of the motor
●The motors have a standard interface for direct
●Dimensions of the driver board approx. 3.5 x 3.1 x 1.5 cm. Diameter of the motor: approx. 2.7 cm. Motor cable length: approx. 24 cm
●Box contents: 5 pieces ULN 2003 stepper motor and 5x ULN2003

Description

Technical data:

Operating voltage:	5 V DC
Insulation	> 10 MΩ / 500 V
Dielectric strength	600 V AC / 1 mA / 1 s
Step angle	5.625 x 1/64
DC Resistor	200Ω±7% / 25C
Gear ratio	1/64
Insulation level:	A
No-load pull in frequency	>600 Hz
No-load pull out frequency	> 1000 Hz
Torque	> 34.3 mN.m (120 Hz)
Torque lock	> 34.3 mN.m
Temperature rise	<40 K (120 Hz)

Technical data:

This stepper motor has five wires and four coils. The central connections of the coils are connected to each other and are used as power connection.

Stepper motor with standard assignment (for direct connection). The four LEDs (A, B, C, D) on the driver board signal the current operating status of the motor

The motors have a standard interface for direct connection without the driver board.

Dimensions of the driver board approx. 3.5 x 3.1 x 1.5 cm. Motor diameter: approx. 2.7 cm. Motor cable length: approx. 24 cm

Box contents:

Pack of 5. ULN2003 Driver Board

Pack of 5. Motor 28BYJ-48 (see image)