Feature
●New NFC circuit: based on the same working principle as the A30 Pro. The new NFC circuit has the same extremely low noise of 0.3uV and a dynamic range of 145dB and 0.0006% THD+N.
●【High or Low Sensitivity】L50 has three gain options, L/M/H. The coverage of a large gain range is enough to meet the requirements of full-size over-ears with low sensitivity to highly sensitive IEMs. Thanks to the extremely low noise of 0.3 uV, even IEMs hear no background noise
●Wide range of adaptation to headphone impedance: the L50 meets the requirements of multiple ideal amplifiers at the same time, so you dont have to choose amplifiers based on the impedance of headphones.
●Input pass through: when shut down, the input signal is output directly to RCA or TRS without amplification, which is more suitable for working with active speakers/monitor speakers if the DAC has a preamp function
●TOPPING E50 will be the best DAC for TOPPING L50: E50 and L50 have fully matched design languages and styles, and signals can be transmitted symmetrically via TRS, E50 uses the sub-flagship chip ES9068AS, supports PCM, DSD, MOA decoding.
[silver]
[Black]
Description
L50 Linear Headphone Amplifier NFCA Mini Hifi Amp Audio
With pass-through function, THD+N<0.00006%. Equipped with two different types of headphone jacks, 6.35 mm headphone output jack/4-pin XLR headphone output jack. Supports balanced and unbalanced inputs and unbalanced output. gogo.gogogo.goWin settings in 3 steps to choose from, L/M/H that meet your requirements. E50 will be the best DAC for L50.
We hope that it can bring you more fun while enjoying music.
Table of Contents
L50 power supply adapter from 6.35 mm to 3.5 mm. User manual quality card
- Dimensions: 6.5" x 5.1" x 1.6"
- Weight: 545 g
- Color: Black/Silver
TOPPING L50 - NFCA Headphone Amplifier
Bypass output happens when the device is turned offHi-Res audio3-stage gain settings: L, M, HNFCA ModuleTHD+N <0.0006%DNR: 145dB noise <0.3uVrmsOutput impedance <0.1ΩMaximum output power: 3500mW x2 at 16Ω, 540mW x2 at 300Ω
- Power: 15 VAC/1 A 50 Hz/60 Hz at DC base 5.5 x 2.5
- Reinforcement: l/m/h
- Amplifier inputs: 1 x BAL, 1 x SE
- Headphone amplifier outputs: 1 x 1/4 inch headphone output jack, 1 x 4-pin XLR headphone output jack
- Preamp outputs: 1 x BAL, 1 x SE
- Power consumption: <7.5 W
|
|
|
|
|
|---|---|---|---|
New NFC circuitNewly designed new NFC circuit based on the same operating principle as the one in the A30 Pro. It delivers twice the power at 300 ohms compared to L30. The new circuit has the same ultra-low noise 0.3 uV and the same dynamic range of 145 dB and 0.0006 % THD+N. |
The sound quality is never a problemWith the help of NFCA, the L50 easily reaches the forefront of the industry and provides near-perfect performance, regardless of distortion, dynamic range and multi-tone testing. |
Fit easily with high or low sensitivityThe L50 has three reinforcement options. The coverage of a large gain range is enough to meet the requirements of low sensitivity full-size over-ears to high-sensitivity IEMs. With the help of the extremely low noise of 0.3 uV, even IEMs do not hear background noise. |
Go through inputWhen shutdown, the input signal is output directly to RCA or TRS without amplification, which is more suitable for working with active speakers/monitor speakers if the DAC has a preamp function. |
