Feature
●Cable management set includes: 1 x main magnet (green), 1 x inner cable/DI2 E-pipe guide wire (including magnet and adapter), 1 x gear brake oil pipe guide wire (including magnet and adapter), 1 x Di2 E-pipe adapter, 1 x output guide wire (30 cm), 1 x assembly instructions (English language not guaranteed)
●Regarding installation and use: there is an installation guide in the packaging, which is available in German and English. In addition, you can access our detailed pages and videos.
●Note: our DI2 E-pipe adapter not applicable to R8000/R8050/R9070/R9150/R9160 3. generation electronic gearbox
●Installation suggestion You can slide the cable half through the frame and then use the main magnet to guide. You can use the main magnet directly to lead out the cable, or you can use the guide rope to guide it out of the frame.
●Installation Details If other pipes are already installed in your frame, it may be difficult to run the cable. We recommend using the main magnet to tighten and the other hand to support the drive during installation when you run the cable.
Description
Note: The serial number provided on this page is different from that shown in the manual.
Here is the instructions for text installation
How to install the gear lever hose, brake hose, oil hose, etc?
Use line(2)
Use the main magnet (4) to guide (2) "magnet + guide wire" through the frame and out of the frame. When (2) is out of the frame, connect the pipe you want to install: Gear lever hose, the brake hose, the oil hose. Pull (2) straight out of the frame another output. The length of the (2) cable is 200cm and will fit through your frame normally.
How to install the inner pull?
Use line(1)
Use in the same way as the cable (2) in step 1 and out of the frame. Place the inner pull on the inner pull adapter (1) and press down with the DI2 adapter (3) so that the inner pull does not fall off when it runs through the frame
How to use DI2 E pipe?
Connect the line (1) and the adapter (3) together, then connect them to the DI2 wire connector and use the main magnet to guide them out of the frame. Not applicable to R8000/R8050/R9070/R9150/R9160 3. generation electronic transmissions
Note: The colour of the product shown varies slightly due to different recording devices, but this does not affect the use of the product.
|
|
|
|
|---|---|---|
They are both positively polarized and close each otherSo if you use the search cable (5) as a guide, please place the main magnet (4) first. |
Use the main magnet (4) to guide the lines through the frame.The main magnet (4) and the magnetic part of the guide wire (1)/guide wire (2) are attracted to each other |
Determine by sound whether the main magnet attracts the wire in the frameWhen it is connected and you move the main magnet, the wires inside the frame make a "sound" when they turn up. |
Note: Aluminium bicycles can also be used with some iron in the frame part
to DI2 adapter
Does not apply to R8000/R8050/R9070/R9150/R9160 electronic transmission of the 3rd
|
|
|
|
|---|---|---|
If there is already an oil hose/inner cable in the bicycle frameit is difficult to pull out the guide wire (1)/(2) with the main magnet from the frame output, then you can use the output guide wire (5) |
When the bike frame is empty and the search cable is easy to move, you can simply pull it out with the main magnet as I did |
Leading lines from top to bottomIt is easier to lay and guide line 1 or line 2 from top to bottom. |
If there is already an oil hose/inner cable in the bicycle frame
When moving, you can encounter lines in the frame, which can cause the magnetism to break and prevent movement.
Please try several times while using the main magnet to tighten, press the guide line at the end with your hand to keep the guide line moving