Feature●Large repair kit with a total of 10 transparent vinyl patches in 4 different sizes for permanent and waterproof repairs/bonding of items made of soft PVC, faux leather and polyurethane as well as for fabric/fabric surfaces made of vinyl, polyester and nylon. All patches are approx. 0.4 mm thick and therefore very durable and durable●For example, for inflatable boats, waders and boots made of PVC, swimming pools, PVC pools. Water toys, rainwear, umbrellas, awnings, sleeping mats, air mattresses, tarpaulins, tents, fishing umbrellas, etc.●Box contents: 3 patches approx. Diameter 35 mm, 3 patches approx. Diameter 45 mm, 3 patches approx. 73 x 38 mm, 1 repair strip approx. 75 x 300 mm, 4 tubes Camplast cement 6 g, 2 pieces of rough paper approx. 30 x 40 mm, 1 illustrated repair manual (English language not guaranteed). And we at fishingglue include: an additional detailed product description with instructions for use and 2 soldering brushes with natural bristles 120 mm long and 10 mm wide.●Storage: The optimal storage is dark, cool (15-25 °C) and dry. Shelf life of the patches and unopened adhesive: if the recommended storage conditions are observed, the repair kit can be stored for many years without quality restrictions.●Please note: This repair kit is not suitable for rubber repairs●Bonding with Camplast cement is up to approx. 60 °C heat stableDescription
Product description
PVC and PU repair kit Camplast Maxi + 2 soldering brushes with natural bristles.
For durable and waterproof plastic repairs.
Instructions for use on items made of PVC, with PVC surface, PU and faux leather:
- Slightly roughen the area to be repaired with the rough paper (slightly larger than the patch).
- Then apply the adhesive to the roughened surface and on the patches and distribute evenly thinly with the brush and apply the adhesive 1 - max. Leave for 2 minutes.
- Now put on the patch and press firmly from the centre outwards and leave under pressure for at least 5 minutes.
- The glued area is then easily resilient. The repair is fully resilient after approx. 2-3 hours.
Instructions for use on articles made of fabric and with fabric surface:
- Slightly roughen the area to be repaired with the rough paper (slightly larger than the patch).
- Apply a sufficient amount of glue to the roughened area and spread with the brush, massage in and approx. Leave to work for 20-30 minutes.
- Then the 2nd Adhesive coating on the 1st Apply the coat and patch and spread evenly with the brush. Then apply the adhesive 1-max. Leave for 2 minutes.
- Now put on the patch and press firmly from the middle to the outside and at least Leave under pressure for 5 minutes.
- The glued area is now slightly resilient. The repair is fully resilient after approx. 2-3 hours.
- Avoid direct sunlight and draughts during every repair/gluing. Temperatures below 5°C can negatively affect the repair result.
Note:
Always clean brushes immediately after use.
Storage/shelf life
Store the repair kit dark, cool and frost-proof at 5-25°C. Unopened and can be stored for several years if the recommended storage temperature is maintained. Legal Disclaimer
Product safety:
Danger
Highly flammable liquid and vapour. May cause drowsiness and dizziness. Causes serious eye irritation.