Hole and seam proof, 12 g.
The hole and seam seal from fishingglue.de is the "solution" for quick sealing of seams and small holes up to max. 3 mm. For holes larger diameter 3mm, please use our PVC and PU repair kits.
Suitable for items made of soft PVC, faux leather and PU (polyurethane) as well as for fabrics and fabric surfaces made of vinyl, polyester and nylon. For example, for films, tarpaulins, umbrellas, tents, shoes, rainwear, etc. Detailed instructions for use can be found on the underside of the plastic box.
The hole and seam tight is very economical, transparent, UV-resistant, does not become brittle and sticks well. Thanks to the ergonomic dosing tip, you can apply the hole and seam tight well and easily dose.
Delivery type: the hole and seam seal is delivered in a sturdy resealable plastic box and contains 1 tube of special solution with 12 g content.
The item is made in Germany.
Instructions for use hole and seam sealer:
Clean and dry the area to be repaired or the seam to be sealed from impurities (even grease and silicone free). Then apply the hole and seam tight generously to the damaged areas or seam and allow to dry for at least 30 minutes. Repeat the job if necessary. The drying time for highly stressed parts such as sleeping mats, air mattresses etc. is at least 3 hours. If you are not sure whether the defective item/material is repairable with the hole and seam sealer, you should Test the application in advance in an invisible area. Avoid direct sunlight and draughts with every repair/application. Temperatures below 5 °C can negatively affect the repair result
Product safety:
Danger
Highly flammable liquid and vapour. May cause drowsiness and dizziness. Causes serious eye irritation.