Use:
Attach the instrument to the dashboard of the centre console and connect the power cord.
Specification:
Item Type: Depth Gauge
Material: 316L stainless steel + anti-fog glass.
Installation diameter: approx. Φ52mm/2inch
Depth display range: approx. 100 m
Backlight colour: White
Operating voltage: 9-32 VDC.
Working current: ≤ 100 mA.
Working temperature: -30°C to +75°C.
Storage temperature: -40°C to +85°C.
Protection grade: IP67, the back is IP5
Operation:
A. This device only works with 12V system to indicate the set depth. Usually the buzzer beeps once when connected correctly, and then turn on the device.
B. Keypad "Mode": Short press the "Mode" keypad to switch SH/DP/KL/UN. Press and hold the "Mode" keypad to turn the monitor on/off. Short press the keyboard "▲"▼" to set the desired value. Press and hold the keyboard "▲""▼" to keep the digital increase/decrease fluent.
Parameters: SH: (Low Alarm) Range: 0-0.6-19.9, when the level is not higher than the value (SH), the symbol flickers and the buzzer beeps all the time. With SH=0, the setting range for the alarm alarm is not 0.6-19.9.
Range:
1. Unit "M": 0-99.
2. Unit "FT": 0-199
3. Unit "F": 0-49 If the level exceeds the specified value, the buzzer beeps twice keel offset (KL):
Range:
1. Unit "M": 0-6.0.
2. Unit "FT": 0-19.9.
3. Unit "F": 0-3.3.
Package list:
1 x depth gauge.
1 x sensor (with cable).
2 x mounting screws.
1 x bundle power cable.
1 x user manual.