Feature(may vary by option.)

●Win Wing 2 with maximum protection at minimum weight: Win Wing 2 (with black control arm) is the stronger, gentler and darker version optimally designed to shield only the upper rear quarter of the wheel and prevent sprays from reaching the riders critical areas. This design minimizes the amount of material required for construction, keeping the weight minimal. The mudguard needs to be installed fairly close to the wheel, with a target of 5-10mm tire clearance for maximum coverage.
●Secure installation: Win Wing 2 Road is suitable for all road bikes with tyre widths up to 35 mm. Choose from one of the three possible settings that match the angle of your seat struts and one that allows for a horizontal or rear position. Avoid a rear down angle as this will reduce the efficiency of the fender The straps are made of ultra-durable TPU and should be pulled as tight as you can comfortably do it by hand. Review videos and instructions for best performance.
●ANTI JAM, ANTI THEFT DESIGN As sturdy as it is, the design of the Win-Wing allows it to bend in the event of an accident and it is constructed to not jam in case large pieces of nature get stuck on your wheel. If you want to permanently attach it to your bike, the Win-Wing can be attached to your bike with a standard cable tie through a designated slot, making it easier to resist people with sticky fingers. If you find that the mudguard is not stable, try using the next hole.
●DURABILITY Win Wing has been designed with an emphasis on sophisticated simplicity and careful selection of materials, making it virtually indestructible. With only four components (competitors use up to 40 components), not so much can go wrong. The fibreglass reinforced suspension arm holder is both flexible and robust and the rubber bands are virtually indestructible. The well-developed design helps convert from the flat shape to a functional mudguard with a pre-folding process.
●SUSTAINABLE: The black blade is made from 80% recycled PP and the Win Wing is designed for efficient shipping and easy recycling. Each component can be purchased separately, which makes repair and upgrade convenient. The Win-Wing is 100% made in Sweden in ISO 14001 certified factories.

[Gravel - BlueDots]




[Road - Black Dots  & Black Control Arm  & 35mm  & WW2]




[Road spectrum (up to 38 mm wide tyres)]




[Gravel Logo Blue  & Black Suspension Arm  & 60mm  & WW2]




[Road Suspension Arm 35mm Praline  & Black 2. World War]




[Road - Stealth   &  Black Suspension Arm 35mm WW2]




[Gravel detour  & black wishbone  & 60 mm  & WW2]




[Gravel - Stealth  & Black Wishbone  & 60 mm  & WW2]




[Gravel - Spectrum  & Black Control Arm  & 60 mm  & WW2]




[Gravel - Golden Groove   &  Black Control Arm  & 60 mm  & WW2]




[Road - Yellow Logo (up to 38mm wide tyres)]





Description

Ass Savers Win Wing Road fits virtually any skinny tire bike and protects the rider even in the worst conditions. Ideal for winter training or if you want to add some comfort to your puristic city ride. The Win Wing wont rattle or jam, and at only 2.2 ounces / 0.2 pounds you wont even notice its there.

The Win Wing Gravel fits virtually any gravel bike and protects the rider even in the worst conditions. No matter what terrain, on the road, or off the Win Wing wont rattle or jam, and at just 2.5 ounces you wont even notice its there.

Based on the principle of tangential coverage, the Wing Wing catches the spray by shielding the upper rear quarter of the wheel, protecting your critical areas (thighs, buttocks and back) and dramatically increasing your comfort. And if comfort can be achieved without a weight penalty, we like to call that a "win-wing situation".

Specifications:
- Full protection for the back from the knee and up.
Patent Pending Control Arm Mounting System
Attaches to any bike in seconds, requires no tools.

Dimensions: 375 x 85 mm, 37.5 x 8.5 cm.
Weight: ultra light with road at 64 grams, gravel at 72g.
Tire size: road is suitable for tire widths up to 38mm, gravel is suitable for tire widths up to 60mm.
Material: Blade - 0.9mm PP (Polypropylene), Suspension Arm Holder - Glass Fibre Reinforced PA (Polyamide or Nylon) and Strap - TPU