[Black  & Aluminium Silver]

[Black  & Aluminium Black]

Fl032:

The Fl032 is a swimming ladder for your inflatable boat. It is installed on two brackets that must be located at a distance of 305 mm from each other. The ladder can be bent in 3 places, so when not in use, it can be folded so far that the ladder is no longer in the water. The brackets do not even have to be loosened. This is very practical as you can make the ladder ready to use very quickly.

Thanks to the articulated joints, it adapts perfectly to the hose of your inflatable boat and is therefore suitable for all hose diameters (diameter). Once attached to the bracket, you can hold onto the top aluminium tube and pull up.
Finally a ladder where the entry and exit really works without any problems. This makes it perfect for the elderly.

This bath ladder has a diameter (diameter) of 32 mm, the joints are made of polyamide. You can simply loosen or screw the joints by hand. The hand nut and a stainless steel bolt make it possible without tools.

Attention: To keep the boat stable when boarding, it is recommended to install the swimming ladder on the sides or on the bow (front) of your boat. If the motor and the ladder are both mounted on the rear (rear), you should make sure that there is a sufficient counterweight in the bow.

There is also a bath ladder with a smaller pipe diameter (diameter). People up to 100 kg and has the item number: Fl022.

Product Features:

• An aluminium swimming ladder for your inflatable boat
• Easy to assemble.
• For 2 x Fs219 brackets with a distance of 305 mm.
• Folds down
• Diameter (tube diameter): 32 mm.
• Can hold up to 140 kg.