Feature

●Size: 604Z (inner diameter = 4 mm, outer diameter = 12 mm, thickness = 4 mm)
●Shields on both sides of the bearing to keep dust away. Suitable for high speed operation
●It is made of carbon steel, durability and resistance to deformation under heavy loads
●ABEC tolerance 1 (P0) for general use
●Like 604ZZ / 604-2Z / 80014. Pre-lubricated, easy to maintain


Description

Note:
Please refer to the picture and choose the correct bearing type before ordering (sealed or shielded on both or one side of the bearing). Replacing marks on the bearing only for distinguishing between sealed and shielded bearing types. It would not affect the use of our product. Description:Deep groove ball bearings are one of the most commonly used rolling bearings. They are used to accommodate radial and axial loads in both directions. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment, etc. These cost-effective bearings are often used in areas with low demands on the Mohs hardness. Single row, pre-lubricated, normal accuracy.
Selection guide:
Shields (designation addition Z/ZZ) - high speed. Protect against dirt and deposits. Sealed (reset mark RS/2RS) - Made of sheet steel reinforced NBR (oil and liquid resistant). Lower limit speed than shield bearings.
Specifications:
Model: 604ZZ
Sign Type: Double Sign
Material: carbon steel
Heat treatment: quenching
Hardness: HRC50-55
Cage material: punched steel
Inner diameter: 4 mm
Outer diameter (D): 12 mm
Thickness (B): 4 mm
Dynamic load (Cr): 0.97 kN
Static load capacity (Cor): 0.36 kN
Accuracy class: P0 (ABEC-1)
Noise level: Z1
Quantity: 10
Weight: 24g