Feature

●Soldering tip cleaner wire uses high-quality brass material. It is smoke-free, tasteless, non-toxic. The soft wound brass tip cleaner can effectively reduce oxide accumulation and extend the life of the soldering iron tip.
●Solder wick braid, 2.5 mm wide and 4.92 inches long, made of copper wires with good quality, precise weave design can improve the capillary effect and superfluous solder absorption, it can provide an easier way to correct errors on small circuit boards.
●This soldering tip cleaner cleans better than conventional sponges, it does not need to be cleaned with water, so the temperature of the tip is not reduced and your work efficiency is improved.
●The soldering tip cleaner can effectively prevent the oxidation of the iron tips to extend the life of your tip, help remove oxides and allow for clean, precise soldering.
●The soldering tip cleaner with holder to catch the soldering tip waste; when you clean the soldering tip, the holder can effectively prevent the tin residue from falling out, keeping your workbench clean.


Description

Attention:
● When replacing the metal wire, wear gloves and set the cleaner upright,
when you open it. Metal wire is springy, so dont take it out to the tip
as it may splash the melted residual solder, please be careful.
● When you take out the clean tinsel, you must wait cool,
to continue to avoid wounds.

Instructions for use:
● If you insert the solder copper into the clean tinsel for so long, gently turn it several times,
and then only weld the residues except for the soldering copper.
After the clean tinsel has been used for some time, you can use the metal wire
Rinse with clean water and then use many times.

Package includes:
2 x soldering iron tip cleaner.
1 x soldering wick braid.