●Improved design with larger filling capacity: Otto 250 ml has a larger filling capacity than its predecessor model and has improved engine performance, which makes automatic soap dispensing even more precise and faster. ●Drip-free: Ottos outlet is drip-free thanks to its improved sealing, which prevents constant dripping and therefore clogging of the outlet. Otto is the ideal dispenser for liquid soap, detergent or hand sanitizer in the kitchen and bathroom; the use of foam soap is not recommended ●Hands-free infrared sensor dispenser: The intelligent sensor technology always releases the same amount of soap (2 ml), without having to touch the dispenser and protects you from the transfer of bacteria and viruses; especially recommended during the flu wave or when handling poultry in the kitchen. ●Plain and modern design The Otto soap dispenser designed by the designer Dennis Cheng for Umbra impresses not only with its functionality but also with its look. Its simple profile and elegant matt finish will enhance any kitchen and bathroom design. ●Easy to fill: Otto has a window on the front that shows the level of the contents. In the window there is also a two-tone LED display. Red indicates low battery and blue lights up when Otto is in operating mode. You need four AAA batteries (not included)
Ottos intelligent sensor technology releases a certain amount of liquid soap or hand disinfectant (2 ml) without having to touch the dispenser and protects you from the transfer of bacteria and viruses. Especially recommended during the flu wave or when handling poultry in the kitchen.
Easy to use
Ottos LED indicator lights up when Otto is turned on (blue light) or when the battery level is low (red light).
Drip free outlet
Ottos seal prevents constant dripping, which in turn prevents clogging of the outlet.
Details:
Built-in motion sensor
Filling capacity: 250 ml
Easy to fill
Suitable for liquid soap, detergent and hand disinfectant
Wide opening for easy filling
Drip free outlet
Troubleshooting
1. Fill tank with hot water
After the batteries are inserted, the blue LED light lights up and you hear a motor sound but no soap is released, try to pour the soap into another container and fill the tank of the soap dispenser with hot, non-boiling water. Wait 5-10 minutes for the water to cool.
2. Activate sensor
Move your hand in front of the motion sensor and repeat this step until the water is properly pumped through.
3. Empty water and fill with soap
Empty the tank and fill it again with the soap.
4. Dilute soap
If you feel that the liquid soap or hand sanitizer you use is too thick, then dilute it with a little water. The use of foam soap, gel hand sanitizer or granular soap is not recommended.