Feature

●Suitable for fine cutting or parting work on small table lathes
●Please note that the knife is already pre-ground, however, the chip guide step must be sharpened.
●Blade height: 5 mm
●Blade thickness: 1.45 mm
●Tool material knife: HSS | Blade length [mm]: 63 | Blade height [mm]: 5 | Blade thickness [mm]: 1.45 | Cross section clamping shaft [mm]: 6 x 6


Description

The matching replacement blade is also available from us.

Please note that the knife is already pre-sanded, however, the chip guide step must still be sanded.