![bidet hand shower](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
We attach particular importance to details. The flow oriented design of the flush valve allows for a perfectly balanced cleaning spray. In addition, you can control the spray strength by a flexible button switch. High quality stainless steel makes the product durable and extends the service life. All necessary components are included and the installation is quick and easy to complete in just a few minutes!
Step 1: Shut off water supply.
Turn the tap on the wall next to the toilet clockwise completely. Rinse the toilet, hold down the handle and empty the toilet tank completely.
Step 2: Make sure there is a rubber washer at both ends of the female thread.
Confirm that the flat rubber washer on top of your T shaped valve for toilet (Note: The top of the T-shaped valve is the position of the rotating nut) and slide it completely down to tighten the connection.
Step 3: Connect the T-shaped valve and the hose.
Turn the top end of the T-shaped valve onto the inlet valve of the toilet, i.e. onto the straight turned off water supply pipe. Be careful not to tighten the connection point too tight. Screw the toilet hose to the bottom of the T-shaped valve. Connect one end of the handheld bidet hose to one side of the T-shaped valve. Screw the bidet spray head to the other end of the bidet hose.
Step 4: Open water supply and install spray head.
Turn the tap back on. If you find that there is looseness or leakage at any junction, you may need to add some line sealing tape. If no water leaks, your handheld bidet sprayer is already installed and ready to use.