Feature

●This screw chuck requires a pilot hole in the workpiece. Then you can slowly drechseln (due to imbalance).
●The round Platen for the Chuck is 20 mm and Is 10 mm deep
●wheel diameter: 46 mm
●Disc thickness: 5 mm
●Thread length: 20 mm


Description

Screw feed Chuck Flying Drechseln Drechsel Wood turning lathe m. screw

- This screw chuck requires a pilot hole in the workpiece. Then you can slowly drechseln (due to imbalance).
- The round Platen for the Chuck is 20 mm and Is 10 mm deep
- wheel diameter: 46 mm
- Disc thickness: 5 mm
- Thread length: 20 mm