Feature(may vary by option.)
●Premium quality: the 80 mm hole saw is made of premium M42 high-speed steel, robust and abrasion resistant. With high wear resistance and high impact resistance, they would provide a long service life.
●Clean cutting: thanks to increased hardness of carbide technology and optimised tooth geometry, fast and more accurate cutting speed. Thats why our hole drill bits cut wood and drywall quickly and cleanly, only smooth edge will be left.
●Remove wood chips: the pre-drilled slot holes around the edges have a beneficial effect on chip removal to improve the speed when removing the cylindrical wood chips in the hole.
●Wide application: for cutting mild steel, stainless steel, cast iron, brass, aluminium, wood, etc., ideal for installing locks, buttons in doors and cabinets or for drilling larger diameter holes through desks and carpentry decoration necessary tools.
●Energy saving: Compared to conventional hole cutters, less of the total amount of material to be removed is actually cut, much less force is required, so you save energy and extend the battery life of your portable power tools.
[ø110mm]
[ø155mm]
[ø115mm]
[ø135mm]
[ø150mm]
[ø130mm]
[ø195mm]
[ø170mm]
[ø80mm]
[ø200mm]
[ø85mm-]
[ø100mm]
[ø105mm]
[ø165mm]
[ø145mm]
[ø125mm]
[ø185mm]
[ø140mm]
[ø120mm]
[ø160mm]
[ø90mm]
[ø180mm]
[ø70mm]
[ø95mm]
[ø75mm]
Description
ITOOLFIRM HSS M42 Bi-Metal Hole Saw.
Advantages:
100% brand new hole drill bit made of premium quality.
The edge of the saw blade is not easy to fall off.
With special carbide cutting edges for precise cuts.
Excellent chip removal thanks to extra large chip spaces.
Direct use - no separate mandrel required.
Attention:
1. Insert the mandrel through the bottom to the tip of the saw blade.
2. When cutting metal materials, remember to add coolant.
3. Cut material must be fixed, it can be moved and opened to a 90 degree angle.
4. During operation or if an abnormal discharge cut is unsatisfactory, please stop working;
5. Please make sure you have firmly attached the screws to the side of the mandrel with hex key and have no wobbling to ensure precise cutting.
6. Remove the spring when processing more than 10 mm thickness;
Bei Problem, bitte doch Kontakt(Per E-Mail durch Amazon) unserem Kundenservice aufnehmen, wir werden within 6 Stunden Inhen Antworten.