Feature
●Premium quality: the hole circular saw is made of premium M55 high-speed steel, robust and abrasion resistant. With high wear resistance and high impact resistance, it would provide a long service life.
●Clean cutting: thanks to increased hardness of carbide technology and optimised tooth geometry, fast and accurate cutting speed. This is why our hole cutter cuts wood or drywall quickly and cleanly, only smooth edges will be left behind.
●Removing wood chips: the pre-drilled slot holes around the edges have a favourable effect on chip removal to improve the speed of removing the cylindrical wood chips in the hole.
●Wide application: the hole drill for cutting mild steel, stainless steel, cast iron, brass, aluminium, wood etc., ideal for installing locks, knobs in doors and cabinets or for drilling larger diameter holes through desks etc. Interior decoration necessary tools.
●Energy-saving: compared to conventional drills, less is actually cut from the total amount of material to be worn out, much less force is required, so you save energy and extend the battery life of your portable power tools.
[orange ø140MM]
[Matte orange ø90MM]
[orange ø180MM]
[Matte orange ø105MM]
[black ø108MM]
[Matte orange ø92MM]
[orange ø135MM]
[matte black ø76MM]
[orange ø120MM]
[orange ø105MM]
[Matte orange ø72MM]
[Matte orange ø95MM]
[black ø68MM]
[black ø150MM]
[Matte orange ø78MM]
[matte black ø68MM]
[orange ø190MM]
[Matte orange ø82MM]
[Matte orange ø60MM]
[orange ø110MM]
[orange ø115MM]
[orange ø130MM]
[Matte orange ø68MM]
[black ø120MM]
[black ø92MM]
[black ø76MM]
[Matte orange ø100MM]
[Matte orange ø85MM]
[matte black 92MM-Mattschwarz]
Description
ITOOLFIRM HSS M42 Bi-Metal Hole Saw
Features:
Premium quality hole drill.
The edge of the saw blade is not easy to fall off.
With special carbide cutting edges for precise cuts.
Excellent chip removal thanks to extra large chip spaces.
Ready to use - no separate mandrel required.
Please note:
1. Insert the mandrel through the bottom to the tip of the saw blade.
2. When cutting metal materials, remember to add coolant;
3. Cut material must be fixed, it can be moved and opened to a 90 degree angle.
4. During operation or if an abnormal discharge cut is unsatisfactory, please stop working;
5. Please make sure you have firmly attached the screws to the side of the mandrel with hex key and have no wobbling to ensure precise cutting.
6. Remove the spring when processing more than 10 mm thick.
If you have any problem, please contact us (by email by Amazon) our customer service, we will reply within 6 hours.