Feature
●Analysis report from 21/2021 by Verichek, ANAB accredited laboratory from Bethel Park, PA, confirms the 6 sizes drill bits of this set. FTG USA have a high speed steel quality class that meets the desired specifications. Used by HSS M2 Grade 6542 harder than 4241 HSS and 4341 HSS in other similar countersunk drills. This product is designed in New Jersey by Fair Trade Group USA and professionally manufactured in China under FTG USA specifications
●Depth adjustable 4 groove cutter, #45 carbon steel counterbore 82 degree chamfer angle cuts and clears chips faster for fast, smooth countersinking The countersink works effortlessly even after many applications and ensures clean and consistent conical holes for screws; Black oxide coating improves corrosion protection; Universal 1/4" hex shank prevents slipping in standard chucks and is compatible with All 1/4 10.2 cm
●High quality built counter bore attaches to flax to shaft with 2 hex bolts for a secure fit and can be adjusted for controlled pre-hole depth; drill, countersink and countersink in one step, the countersink provides superior speed and clean finish; 2 adjustable depth stop collars (1/2" and 3/8") included and 1 hex key (1/8") Allen key) included
●One of the most popular adjustable wood countersink drill sets for woodworking; high-quality material components, very durable: HSS M2 grade 6542 taper drill, confirmed in the analysis report, best high-speed steel, for its high strength, wear resistance and good cutting safety; 4 cutters #45 carbon steel; with 5 pieces sizes #4 (7/64). inch), #6 (99.5) 162.6 cm, #8 (11/64), #10 (3/16"), #12 (7/32"), #14 (1/4") and 2 depth stop fasteners (3/8" and 1/2")
●International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
[Set of 5 sizes and 2 stop fasteners]
[5 sizes with collar]
[Sizes #6#8#10 Extra Length 6 Bits]
[Three sizes set #6#8#10 without stop collar]
[Ohne Tiefenanschlag]
[Set of 6 sizes and 2 stop fasteners]
[Set of 3 sizes and 1 stop collar]
Description
FTG Maximum Torque Version 2.0 with Upgraded Connection Drill to Hex Shank No Pin 6 Piece Set Adjustable Wood Cone Countersink with the Best Conical Drill Bits Tested by Third Party HSS M2 (Grade 6542), by far the most popular high speed steel, with superior features including high toughness, Wear resistance and good edge retention. The logo is laser printed on each countersink shank, making it easier to distinguish this quality brand from others. Super sharp, very durable, easy to use and built to work well in both hard and soft woods. Countersink #4 bit diameter 2.8mm, countersunk bore and plug size 3/8" - countersink #6 bit diameter 9/64" (3.6mm), countersunk size and plug size 3/8 bit diameter 11/4.4mm, countersink drill and connector size and size Size 3/8" - Countersink #10 Bit Diameter 3/16" (4.8mm), Countersink and Plug Size 3/8" - Countersink #12 Bit Diameter 7/32" (5.6mm), Counterbore and Plug Size 1/2" Small Sink #14 1/4" (6.2mm), counter bore and plug size 1/2". All have a 1/4" shank size. Drilling, countersink and counterbore in 1 operation. High quality material #45 carbon steel adjustable four-cutter bore, chamfer angle 82 degrees, attachment cuts quickly and cleans chips quickly for fast, smooth cutting applications. The counter bore attaches flat to the shaft with 2 hex bolts for a secure fit and can be adjusted for a controlled pre-drill hole depth to provide a clean finish for more polished end products. 1 x Hex Key (1/8" Allen Key) This product is designed in New Jersey and professionally manufactured in China according to FTG USA specifications. Packaging set design protected by US Copyright Office