Feature

●Durable aluminium alloy material: the concealed 35 mm hinge device is made of high-quality aluminium alloy material with precise manufacturing, precise positioning, sharp drill, wear-resistant and durable, corrosion resistant and rust-proof, a hinge device can be used for years.
●Double clamp design: the cabinet hinge hole saw has two clips, a rubber pressure tip, more stable than the old one, with firmer grip and does not move when drilling. Applicable to door thickness:15-25mm, opening depth 10-15mm.
●Easy to use and install: 1. Install a 35mm hole opener, adjust the drilling depth to 12-13mm and then lock the boundary ring. 2. Adjust the fixed size of the Fast Clip Black press block.3. Move the hole punch to the marking and drilling position of the plate and lock the quick clamp.4. Tighten the handle of the drill, press the hole at constant speed to a depth of 12-13 mm, and then drill 2 mm screw holes on the left and right side.
●Bearing drill bushing: the total height of the top, middle and lower bearing drill bush is 2 cm. The higher the height, the less the drill swings and the more precise it is drilled. The edges of the holes are adjustable and the adjustable range of the edges is 3-7 mm. Method: loosen the screws, refer to the positioning scale on the machine, and cover the stainless steel positioning adjustment plate.
●【Cabinet Hinge Hole Punch Set】 1 x Hinge Drill, 1 x 35mm Hole Opener, 1 x Top Link Bearing, 1 x Depth Positioning Ring, 2 x Wrench, 1 x 2mm Drill, 1 x Allen Wrench. You can use the wrench to adjust the pressure plate to the desired thickness.


Description

35mm Hinge Positioning Hole Drilling Tool


Function:

Double clamp, rubber penetrator.

Clampable plate thickness: 15-25 mm.

Hole depth: 10-15 mm.

Edge groove depth: 2 mm.

Edge sealing groove design

After the door panel frame has been sealed, it can also work normally without affecting the slot accuracy.

Upper, middle and lower three-ply drill bushes have a total height of 2 cm. The higher the height, the smaller the deflection of the drill and the more accurate the drilling.


Installation and use method:

Step 1:

Install the 35mm hole opener, adjust the drilling depth and then tighten the boundary ring. (Suitable for normal 15-25 mm thick materials).

Step 2:

Adjust the black pressure plate and red quick release to determine the position, and lock the red quick release.

Step 3

Use an electric drill to press and open the holes at constant speed.

Step 4

Get a 35mm hinge hole and two 2mm screw holes on each side to install the hinge jig


Package includes:

1 x hinge drill.

1 x 35 mm hole saw drill.

1 x top link bearing.

1 x depth positioning ring.

2 x spanners.

1 x 2 mm drill.

1 x Allen key