Instructions for use:
1. Remember to attach the drill and make sure it is at a right angle of 90 degrees to the hole without moving.
2. If the positioning drill has penetrated, please wait a while and then drill slowly
3. If there is an anomaly during operation or the removal of the chip is not ideal, please stop working and work after chip removal.
4. When drilling holes, you need to add water or use coolant to extend the life of the drill.
Features:
Alloy material
Precision manufacturing.
Anti-fracture.
Long service life.
Use in multiple scenes
DETAILED DESIGN:
1. The 135° tool tip ensures that the drill can be quickly inserted to drill the hole when drilling.
2. Chip flutes ensure smooth and efficient drilling of the drill bit, allowing for a long term service life.
3. Applies to all SDS clamping hammers with two wells and two slots.
Package contents:
2 x SDS Plus drill bits 5 x 160 mm.
2 x SDS Plus drill bits 6 x 160 mm.
1 x SDS Plus drill 8 x 160 mm.
1 x SDS Plus drill bit 10 x 160 mm.
1 x SDS Plus drill bit 12 x 160 mm.
1 x SDS Plus drill bit 14 x 160 mm.
1 x SDS Plus drill bit 16 x 160 mm.
Our drill set has 2 x 5.2 x 6 mm for replacement, so you do not need to buy the 2 types of drill bits that are sharpened more easily.