Feature(may vary by option.)
●4 x 90° cutting head (welded at 5-9 mm) optimal drilling progress; 4 breaker points propulsion teeth for up to 20% faster drilling progress; reinforcement chamfers for up to 50% longer service life for reinforcement strips; conical spiral back and further spiral for optimal drilling more transport and faster drilling
[10 x 110 mm]
[5 x 115 mm]
[10 x 210 mm]
[12 x 160 mm]
[14 x 210 mm]
[14 x 600 mm]
[12 x 210 mm]
[22 x 450 mm]
[18 x 450 mm]
[12 x 450 mm]
[6 x 165 mm]
Description
Product description: Pattern name: 8 x 455 mm. The hammer drill bits from Milwaukee from the RX4 series are characterised by their SDS-Plus shaft as well as the four harmetal cutting edges embedded into the drill head. Deep recessed into the drill head, one-piece carbide plate with centring point for easy, precise drilling and outstanding service life. The four symmetrical 90° cutting edges guarantee circular drill holes for optimal dowel mounting, as the drill bits do not block when drilling in reinforced concrete. A large volume spiral design ensures optimal drilling dust transport. Thanks to the 4-spiral spiral geometry, the vibrations are very low and wear is also evenly low. This is a quality product made in Germany. Technical data sheet: total length (A): 400 mm - spiral length (B): 450 mm - : 8 mm