Functions:
Due to some elasticity, the load on the thread can become more even, eliminate the deviation of the screw and screw hole between pitch and tooth type and absorb vibrations, which increases the strength of the screw thread connection and resistance to fatigue. The locking sleeve for wire screws can lock the screw in the threaded hole, so that the screw does not become loose in case of shocks. This is better than the normal locking device. The hardness of the wire screw is higher than that of the screw, so it has little wear in connection with the screw and can be used repeatedly. Strengthen the connection strength and improve the connection state, avoid sliding wires and the phenomenon of wrong teeth and achieve excellent connection performance. Used to the place where there is a fixed connection. cut outs that cut out the Screw hole to increase wear-resistant. With frequent disassembly, the life of the thread can be significantly extended. Anti-loose. Specially designed for aircraft and other products that require high insurance coefficients. Easy to maintain. The damaged screw holes are inserted into the wire screw sleeve, which can be used again to avoid the possibility of damaging the workpiece.
Technical data:
Material: stainless steel
Quantity: 60.
Weight: 104 g.
Size: (inner diameter x thread pitch x length), 2D = 2 x inner diameter
M3 x 0.5 x 2D (10 pieces).
M4x0.7x2D (Pack of 10)
M5x0.8x2D (Pack of 10)
M6x1.0x2D (Pack of 10)
M8x1.25x2D (Pack of 10)
M10x1.5x2D (Pack of 5)
M12x1.75x2D (Pack of 5)
Box contents:
60 x wire screw sleeves.