The IX-AOS-100 from IXES is a practical 5 in 1 tool that can be used with an operating pressure of 6.3 bar for digging or renovation work, removing wall and floor coverings. Thanks to the vibration-dampened rubber handle, the compressed air multifunction tool sits comfortably in the hand during any work.

A total of three chisels are included. A pointed chisel whose sharp point easily penetrates concrete or masonry and crushes them. The 60 mm wide chisel is suitable for demolition work and for removing plaster, tiles, plaster and mortar from walls and floors. The narrower flat chisel, on the other hand, helps with demarcation work, such as when working out channels.

Paints, varnishes, impregnated floors, linoleum, carpets and adhesive residues are best applied with the scraper. The wide attachment with straight edge saves you the tedious scraping by hand and thus speeds up the work considerably.

The spade supports all earthwork, whether it is when creating a new bed, lawn edging, planting hole or separating and digging roots. Made from forged steel, the spade, from which the name of the Aero2 Spade derives, is particularly robust. With the IX-AOS-100, fatigue-free digging is possible even on larger areas, because the throughput is much higher than a conventional spade.

The IX-AOS-100 can also be used with smaller compressors. An air volume of 160 l/min and a 24 litre tank is sufficient to carry out smaller excavation work, for example. For medium excavation work and removal of root pieces, IXES recommends the use of a 50L compressor. A 100 litre compressor is only required for demolition work and larger excavation work.