Feature

●We ship from the US warehouse overseas, it is fast and guaranteed.
●Replaces water shutters / flaps 807166A1 32-14358, 32-14358T, 32-14358001, 18-2746 lower exhaust bellows, pipe, hose, clamp.
●Also replaces 32-44348, 32-44348T, 32-44348001, 18-2748 upper exhaust bellows, pipe, hose, clamp.
●Please note these will not work on V6 engines supplied with one piece manifold (use 807166A2 flat tip), or early V8 engines where the round pin goes through the flap.
●High quality. In collaboration with the local workshop, quality is guaranteed.


Description

Replaces 2 of each of the following parts:
807166A1 Water Shutters / Flaps 32-14358, 32-14358T, 32-14358001, 18-2746 Lower Exhaust Bellows Pipe Hose Clamp
32-44348, 32-44348T, 32-44348001, 18-2748 Upper exhaust bellows, pipe, hose, clamp, suitable for many Mercruiser V6 and V8 engines. The kit contains two 4" top hose bellows.
Replaces 32-44348, 32-44348T, 32-44348001. Two lower exhaust hose bellows replace 32-14358, 32-14358T, 32-14358001 replace two roller shutters, 807166A1 eight stainless steel clamps.
Note:
These will not work on V6 engines supplied with one piece manifolds (use 807166A2 with flat tip) or early V8 with round pin through flap. Used on many V8 engines with Mercruiser rear wheel drive (Some V6 supplied with the two-piece splitter / angle)
For engines from 1998 onwards, some models from 1996 and 1997 are applied. There are two rectangular holes for the eyelets. If your Y tube has round holes, you need the A3 water stores. If the size of your Y tube changes a few inches below the closure, you have a one-piece V6 Y tube and will need the A2 closure.
If you have ever overheated, they can be damaged. Sometimes you will find parts of it in the exhaust when you remove the drive for maintenance. They prevent water from entering the engine through the exhaust.