Feature●Note 7: The Inside Of The rim Herausstehende Length the range screw must smaller than the thickness of the wheel spacers and with thread throughout.●Please note 14: when using the Dra/systems in conjunction with Series wheels are the series-Wheel screws to long. They have to be cut to size as or by the wheel bolts by H & R 1452802 replaces. In this case the bord tool to put a spanner size: SW 17.●Note 21: Cars with sliding doors should be checked for the use of 50 mm and 60 mm systems in advance.●Notice 25: not with steel rims fahrbar.Ihen 89 – B4 and C4/S6 to be 2 The automotive Medium centering for use with the 30 and 40 mm systems to long. In these cases is H & R for the 4-hole models No. 40234572 or 40234573 (MZ 22 mm) and for the 5-hole models the H & R No. 4055571 for longer use. In the wheels retrofit area can be used to create special requests.Description
Dra system
The wheel spacers is attached using the included Befesestigungs screws on the axle system surface. Attaching the wheels is effected by the existing Series Wheel Bolts and wheels. The from the rim Extended Length of the existing wheel bolts must be sure this will be lower than the thickness of the wheel spacers.
* All parts are included to secure the wheel spacers.*
The drop of the this H & R CAN BE FOUND UNDER www.h-r.com/de/produktfinder.html
Are you there Looking Manufacturer Part Number: 5055571
TRAK + wheel spacers/Trak + Wheel Spacers
Wheel spacers per axle 50 mm
Bolt Circle Diameter: 112 mm, hole, Number Of 5
Lower and limit front axle 20 mm, base and limit Rear Axle 20 mm
Centre alignment 57.1 mm
Thread Size: M14 x 1.5
With TÜV report
Thickness and thickness: 25 mm
Silver
Supplied complete with wall fixings. , Please note: