The process of attaching the pedals is:
1. Place the strap with bolts and screws of the pad for the pedal
2. Place the strap with screws and bolts on the pad for the pedal. Then place the pad in the correct position to place the straps around the original pedal.
3. Fold the straps to tighten them around the original pedals. You need to use pliers and rags to secure the straps firmly so they can no longer move.
4. Check if the straps can be folded around the pedals.
5. Find the correct position of the foot pad, mark the position of the holes and drill the original pedal.
6. Insert the pedal pad with the Parker screws of the original pedal.
Approximate dimensions:
Brake and clutch lever: 9 cm width / 7.5 cm length.
Accelerator: 7 cm wide / 13 cm length.
Important: these dimensions please check and compare them with your car.
Pedals may vary like models and change in car design.
means that these covers will not be compatible.