Feature

●The USB-C Male to 12V Cigarette Lighter Adapter is the perfect solution to convert the 5V USB Type C into a 12V cigarette lighter socket in the car without a cigarette lighter socket. This output is 1A, suitable for dash cam, GPS, radar detector, etc.
●Input voltage: 5V, Input current: 2.1A-3A, Output voltage: 12V, Output current: 1A (MAX), Maximum total output power: 12W. The input power must be equal to or greater than the output power of the device. For example, if the output end is connected to a 10W dash cam, the input end must be at least 5V 2.4A to ensure the stable operation of the device over a long period of time.
●Please note: 1. The operating voltage of the input device is 12V, not higher or lower; 2. The input device should be less than 1A. 3. USB power supply for sufficient 2A full charge, 5V output; 4. Do not use products with a rated power of more than 12W (12V).
●The USB-C to 12V cigarette lighter adapter can easily power on-board devices. The output end can only be connected to the car devices within 12 W. Automatic overload protection can prevent short circuit, over voltage and over current.
●Widely used in car devices, driving recorders dashcam, GPS, car charger, car LED strip light, car fan and other car devices with a power of less than 12W. Do not support vehicle vacuum cleaner, vehicle air pumper, portable tyre inflator, small portable tyre compressor and other large current devices."


Description

Product description:
CERRXIAN 1 Foot USB-C Male to 12V Cigarette Lighter Adapter
If the car cigarette lighter interface is not enough, the USB-C male to 12V cigarette lighter adapter can convert the 5V power supply of the cars USB TYPE-C interface into the 12V output of the cigarette lighter socket and can be connected to dash cam, electronic dogs, etc.


Product length: 30 cm
Input interface: USB TYPE-C
Output interface: cigarette lighter
Input voltage: 5 V.
Input current: 2.1 A-3 A. Output voltage: 12 V.
Output current: 1A (max).
Maximum total output power: 12 W

Please note: 1. The operating voltage of the input device is 12V, not higher or lower;
2. The input device should be less than 1A. 3. USB power supply for sufficient 2A full charge, 5V output; 4. Do not use products with a rated power of more than 12W (12V). .