Feature(may vary by option.)
●Drain lid is only suitable for ZR 80 Truma wall fireplace set with no. 34000-33500 chimney inner part and no. 36151 fireplace outer part: no drilling is necessary for chimney installation, the original screws are used.
●Condensed water drain for screw mounting on fireplace parts with 96 mm hole spacing: the hole spacing (screw centre to screw centre) of the chimney inner pipe and outer lid must be 96 mm - otherwise the water drain does not fit.
●Drain for condensation water protects against dirt on the vehicle wall – ice formation – algae: thanks to the condensation drain, fewer exhaust residues are deposited on the vehicle outer wall of the motorhome.
●Fireplace cover drain made of weather-resistant plastic: the exhaust fireplace drain is UV-resistant, temperature-resistant and corrosion-resistant for a long time.
●Box contents: 1 x chimney cap drain, in white, made of plastic, for screwing on to the existing heating pipe outlet system.
[White V1 for ZR80 2pcs]
[White | V1 | for Zr80 | 1 piece.]
[Black | V1 | for Zr80 | 1 piece.]
Description
RV Condensation Drain 1 Piece White Fireplace Sign Drain Fits Truma Fireplace Part ZR80 96mm Hole Spacing Minimizes Dirt + Ice Formation
Your caravan heater leaves exhaust gas and dirt residue on your caravan wall?
This does not have to be - use this condensation drain to dissipate the exhaust gases and condensation from the caravan wall and drip directly onto the floor.
This version of drain condensation is only compatible with ZR80 Truma fireplace inner part 34000-33500 and chimney outer part 36151 with 96mm hole spacing.
Fireplace covers with larger and smaller hole spacing (e.g. TrumaticE2400 or VarioHeatWK24309) are not permitted for this version - please measure before ordering and avoid elaborate returns.
For mounting the drain for lid, only the original screws of your heater cover must be loosened and the fireplace sign drain can be attached to the fireplace lid from the back.
After that, the fireplace sign with condensation drain is re-attached and screwed with the original screws.
This assembly takes only a few minutes, only a screwdriver is required.
With the mounted fireplace outer drain, the caravan is still ready to drive.
Product details at a glance:
- Only for 96mm (centre to centre) hole spacing
- Suitable for ZR80 fireplace inner part 34000-33500 and fireplace outer part 36151
- Condensation drain made of weather-resistant plastic
- Optimised drain flow and safety edges for better drainage
.
.
Attention:
The exhaust gases and condensation from the heating system contain dirt particles that settle on the fireplace cap drain. This allows the motorhome condensation drain to be discoloured.
The package includes:
- 1 x fireplace cap drain, white, made of plastic, for screwing to the existing heating pipe outlet system
