[Honda-Helix CN 250 Fusion Spazio MF02 -99]

Naraku racing carburettor 30 mm for GY6 125-300cc and Kymco 125-300cc engines. Intended for racing purposes only.

The connection width to the intake is 36 mm and the filter side is 50 mm. Particularly interesting for vehicles that cannot mount higher carburettor due to their design. The throttle cable is laid on the side of the carburettor and is therefore no longer in the way if frame or helmet compartment structures would affect the throttle cable. Height approximately corresponds to the original carburettor.

Please check whether the carburettor can be used on the vehicle before ordering. This is not a ready-to-install kit. Another air filter must be used and/or another intake manifold installed or modified the original. (Note connection widths)

Technical data:
Main nozzle = 116.
Supplementary nozzle = 38 mm.
Passage: 24 mm.
Connection width air filter side = 50 mm (outer diameter).
Connection width intake side = 36 mm (outer diameter).

Important note:
This carburettor is a tuning part. This carburettor does not fit Plug & Play on the models. Adjustment work is required.

Note: The carburettor comes with a basic setting and still needs to be matched to the respective vehicle. Main nozzle, secondary nozzle, needle clip, idle mixture and standing gas must always be adjusted, as each engine runs differently and has other components installed. An incorrectly adjusted carburettor can lead to a major engine damage.