Feature

●12 V / 1 amp.
●Pressure: 2-5 PSI / flow rate: 50-60 litres per hour
●Connection input: straight 8 mm (5/16 inches).
●Connector output: straight 8 mm (5/16 inches).
●Length of connection cable approx. 22 cm


Description

Your fuel pump no longer does what it should do? Then we have a replacement for you.

This petrol pump provides the carburettor or the injection system with sufficient sprit and the corresponding pressure. It is necessary because otherwise the engine can expose, the engine power will decline or a bad start behaviour may occur. These symptoms are caused by the undersupply with sprite.

Possible causes of the defect of the pump can be dirt inside the pump or also leakage. In addition, electrical defects can cause a standstill. Do not let a broken fuel pump brakes and replace them with the offered here!

The feeling of freedom of driving winds that "bounces" against the body and a quick way from "A" to "B" make motorcycling what it is. You see that as well? What are you waiting for? Swing on your motorcycle and enjoy the exit.

Technical data:
12 V.
1 amp.
Pressure: 2-5 PSI.
Flow rate: 50-60 litres per hour.
Connection input: straight 8 mm (5/16 inches).
Connection output: straight 8 mm (5/16 inches).
- Length of connection cable approx. 22 cm

Box contents:
1 x petrol pump.