Feature●2 x 10 Watt 39 Ohm + 4 branch terminals, load resistor for LEDs/SMDs, remedy error messages or flashing too fast for lamps up to 10 watts with this resistor●For cancelling triggered error messages by lamp monitoring when converting to LEDs/SMDs●High-quality workmanship, easy to install thanks to the approx. 20 cm long cable (per side) and the enclosed branch terminals●Note: the resistors get hot, there must be no contact with plastic, it is recommended to mount the resistors freely hanging or attach them to metal●Suitable for LEDs in parking light, parking light, license plate light, indicatorDescription Have you retrofitted LEDs and receive an error message? With us you will receive 2 x 10 W 39 Ohm with extra long cables (approx. 20 cm per side) to simplify installation + 4 power thieves / branch terminals load resistors for cancelling error messages after conversion to LEDs. Suitable for the use of standard halogen lamps from 4 watts to 10 watts (5 & 6 watts) to simulate the necessary power consumption and thus suppress the error message. - Install resistors only after eliminating a passing error message - An illustrated assembly sketch is included in the delivery -