Feature●Small number plate light in aluminium housing for mounting●Can be screwed on with screws and the matching thread on the underside●Thanks to the included 3M adhesive strips, this is also possible without screws●12 V DC, 0.3 W●Width x height x depth with/without shade: 48 x 13 x 22/15 mmDescription
ShinYo LED license plate lighting micro aluminium.
Small number plate light in aluminium housing for mounting.
Details:
- With the two screws and the matching thread on the underside, you can attach them to the number plate holder or the rear.
- Thanks to the included 3M adhesive strips, this is also possible without screws.
- The aluminium housing has a shield and thus prevents radiation in unwanted directions so that it is not dazzled.
- This allows the legally required complete illumination of the number plate in many mounting positions.
- 3 bright LEDs.
- 12 V DC, 0.3 W.
Dimensions (approx. ):
Width x height x depth with/without shade: 48 x 13 x 22/15 mm.
Thread length M3 screws: 14 mm.
Cable length: 55 cm.
Weight: 21g
Cable assignment:
Red = Plus
Black = minus.
Open cable ends without plug.
Options:
- Also available as a version without housing for installation (order number 50160300640).
- Adapter cable for round receptacles to the original plug (order number 60390776000 and following).
Approval:
With E-mark.
The license plate light has an E-mark and does not require any other papers.
It can therefore be installed without further ado, according to the cultivation regulations.
Price per item.