Feature

●Motorcycle cable set: consisting of a 40 A relay, an illuminated toggle switch and over 3.7 foot cable, this LED high beam wiring harness simplifies the installation process to power different devices in cars.
●Installation steps as reference: first connect the red cable + from the fuse to the battery +; connect the black cable of the answer to the battery - and connect the cable of the light bar of the relay. Later, connect the red + / black cable from the switch to the battery or anywhere in your car system. Finally, turn on the on/off switch of the switch to test the light bar. Illuminated On/Off Rocker Switch
●Safety: illuminated on/off rocker switch 12 V 40 A power relay. Protect your vehicle with circuit protection, built-in inline fuse and relay for multiple protection from possible damage caused by overcurrent or short circuit.
●【Long Wiring】Depending on the vehicle model to be installed, a cable holder will vary more than 3 meters.Excellent conductivity, excellent bending performance to ensure that the beam is not easy to break.
●Widely used: High characteristic, stable performance. Universal fit for most vehicles. The LED off-road light harness is the perfect accessory for off-road cars, work vehicles and most cars that could use a relay to power certain devices.


Description

Description:
The wiring harness for LED off-road lights is the perfect accessory for off-road automobiles, work vehicles and most automobiles that could use a relay to power certain equipment. This wiring harness for LED off-road lights consists of a 40 amp relay, an illuminated on/off rocker switch and more than 10.7 feet wiring and simplifies the installation process for powering various devices in motor vehicles.

Specifications:
Material: plastic.
Colour: black.
Relay: 12V 40A
Cable length: approx. 3.26 m
Package weight: approx. 209g
Features: universal.

Package includes:
1 x wiring set for fog light switch.

Installation: (for reference only).
1. Connect the red cable from the fuse to the battery. Connect the black cable from the answer to the battery.
2. Connect the cable for the light strip from the relay. (Red/black corresponds to the wire of the light strip).
3. Connect the red +/black cable of the switch to the battery or any location of your vehicle system to power the switch.
4. Turn on the on/off switch of the switch to test the light bar.

Notes:
1. Easy to install, but professional installation is highly recommended!
2. Please allow 1-3 cm error due to manual measurement. Thank you for your understanding.