Feature

●【Check car model】 Please check your car model if it is compatible with EL-50448 on the latest pictures. The tyre pressure sensor cannot be used for trucks. The TPMS tyre pressure sensor on models in and after 2012 can only be read with certain diagnostic tools.
●Easy to use step: EL-50448 tpms reset tool program all tyres much easier with just 3 steps: Step 1 - Activate the Reclining Mode, Step 2 - Read information about the tyre pressure sensor, Step 3 - Same method for reading other tyre pressure information.
●【About the learning mode】 Make sure the vehicle is in TPMS learning mode, and follow the maintenance procedure. Hold the tool against the side wall of the tyre near the valve stem. Press the learning button while holding the tool against the side wall of the tyre.
●Easy activation: the tool for activating the tire pressure control sensor is simple, quick and easy to use and activates the individual TPM sensor with one push of a button.
●【Instructions for use: Different vehicles may require different times to reset all tyre sensors after turning. The tyre pressure control sensor uses a NEW 9V battery. The charger and battery are not included. Remove the battery when not in use.


Description

Instructions for use:
1. Turn the car into TPMS learning mode. (Car Horns twice)
2. Start the reclamation process from the left front tire and align the antenna to the correct position. Press the on/off switch and release it. Once the speaker has chirled, proceed to the next tire.
3. Follow this order to put TPMS sensors: front left, front right, rear right, rear left.
4. After all sensors have been reset, the car horn twice means that the TPMS relearning is completed.

Please note:
1. When using the EL50448 pay attention to the correct position of the antenna.
2. Make sure the 9V battery is in good condition.
3. It works for light trucks, but not for heavy trucks.