Specification
Input voltage: DC 10 V to 60 V
Input current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A
Quiescent current: 15 mA (when converting 12 V to 20 V, a higher output voltage increases the quiescent current)
Output voltage: 12-97V infinitely adjustable (cannot be used to reduce the voltage).
Output current: 22A (related to the input and output voltage difference: The greater the voltage difference, the lower the output current. Please increase heat dissipation if the current is above 15A.)
Constant current range: 0.8-22A (+/- 0.3A)
Reverse polarity protection: Yes (150A power MOS reverse polarity protection)
Input low voltage protection: Yes (10V-50V adjustable, self-recovery)
Operating temperature: -40°C to 85°C
Frequency: 150 kHz
Conversion efficiency: 92% to 97%
Input over current protection: Yes (automatic protection when the input is more than 40A and the supply voltage does not increase)
Short circuit protection: Yes (input fuse 60A). Please be careful and try not to cause a short circuit.
Reverse input protection: Yes (150A power MOS tube, can be connected reverse for long time)
Installation method: Four 3 mm standoffs
Wiring method: Terminal Blocks (Please use copper wire with large current)
Output power: max. Output power = input voltage x 30 A (at input 12 V, the maximum output power = 12 V x 30 A = 360 W)
(With an input of 24 V, the maximum output power is 24 V x 30 A = 720 W.)
Weight: approx. 372 g