Feature
●▶ When connected to the motorcycle battery as power input: the Qi 15W wireless charger for motorcycle phones and the 20W fast charging USB C port both work well. Supports charging two compatible devices simultaneously. Allows connection to the vehicle battery of DC 12V-24V. Wireless charger, compatible with Qi 15W/10W/7.5W/5W wireless charging modes on the market. USB-C port output: 5V/3A, 9V/2A, 12V/1.5A
●▶FLEXIBLE DESIGN:The USB-C port of our motorcycle phone holder can be connected as input to a power bank or USB socket. If you get power in this way, you can only charge smartphones via the wireless charger. USB-C port input: 5V/9V/12V. Note that the USB-C port may not be connected to the PD type C socket to get power.
●▶ Sturdy and Safe: This main body of motorcycle phone holder is made of PA66+GF30% material. Equipped with 6061-T6 aluminum alloy handlebar base. Built-in with shockproof soft silicone. For durability and reliability in the most demanding environments.
●▶IP66 WATERPROOF:The internal circuit of the motorcycle charger holder has a fully enclosed design. Equipped with waterproof on/off switch and indicator light. USB-C charging port with water and dust cover.
●▶ WIDE COMPATIBILITY - This motorcycle phone holder is compatible with 4-8 inch phones. Maximum compatible thickness: the total thickness of the mobile phone and mobile phone case should not exceed 12 mm. For handlebars with 0.5"/0.87"/1"/1.26" diameter. Suitable for installation on bicycle, motorcycle, electric scooter, dirt bike, ATV etc.
Description
Input: DC 12V/24V
Wireless output: 15 W max
USB-C output: 20 W max
Comes with a 63 inch power cable
For motorcycle mobile phone holder USB C connection as an input
This wireless charger for motorcycle phones can charge which models of mobile phones?
As long as your smartphone supports Qi 15W / 10W / 7.5W / 5W, this motorcycle phone holder can charge it wirelessly.
Motorcycle Phone Holder with Aluminum Alloy Handlebar Base
Parameter details:
1. Compatible with 4 to 8 inch mobile phones.
2. Can hold mobile phones with a thickness of less than 12 mm.
Which handlebar sizes are compatible?
The motorcycle phone holder handlebar mounting base comes with three rubber ring inserts to ensure a tight fit and protection of the mounting surface. Rubber ring diameter: 12 mm (0.5 inches), 22 mm (0.87 inches), 25.4 mm (1 inches). You can add or remove the rubber ring according to the diameter of the handlebar. If the rubber ring insert is not embedded, the hole diameter of the handlebar mounting base is 1.26 inches (32 mm).
So the handlebar base is compatible with handlebars with a diameter of 0.5 inches (12 mm) / 0.87 inches (22 mm) / 1.0 inches (25.4 mm) / 1.26 inches (32 mm).
This motorcycle bicycle phone holder is suitable for mounting on motorcycles, ATV, bicycles, mountain bikes, strollers, dirt bikes, scooters, trekking bikes, electric scooters, road bikes, golf carts