Feature
●Voltage: the DC input range is between 200V and 400V (less than 200V triggers a low voltage alarm and stop, over 400V automatically suppresses the voltage increase to avoid overvoltage trigger and stop)
●Built-in MPPT regulator: automatic start and stop (in the morning, when the light intensity reaches the input voltage of 200V, the photovoltaic inverter automatically starts to run the load without thinking of operation. When the light intensity decreases and the input voltage drops below 200V, the photovoltaic inverter automatically stops the drive of the load and no human operation is required.
●Applications: 1.The motor equipment of the drive motor can completely replace the photovoltaic inverter. 2. The photovoltaic inverter can only be used to drive engine and engine loads. 3. Solar power generation, motor water pump drive.
●Connecting Solar Panels: As with 220V motors, the total voltage of the solar panels connected in series must be 200V to 400V. 380V motors, and the entire serial voltage must meet 400V-700V. The power is that the total power of several solar panels connected in series is more than 1.2 times higher than the power of the inverter.
●Functions: 1. Solar DC to AC, can drive motors and motors and completely replace photovoltaic inverter. 2. Take a 24 V DC fan, an external aluminium cooling base and efficient heat dissipation.
[1.5KW]
Description
Built-in MPPT controller: (Maximum Power Point Tracking), which can capture the generated voltage of the solar panel in real time and track the highest voltage and current value (VI); it is the brain of the photovoltaic system, which allows the system to drive the load with the maximum power output, and that is applied to the solar photovoltaic system to coordinate the work between the solar panel and the load .
Specification: Item Type: Solar Inverter
Model: 9100-1T-00075DB / 9100-1T-00150DB / 9100-1T-00220DB (optional).
Adapted motor power: 0.75 kW / 1.5 kW / 2.2 kW (optional).
Nominal current: 4A / 7A / 10A (optional).
Input voltage: DC200-400V.
Output voltage: 3PH AC0-220VAC 0-50Hz.
Method of setting output voltage: PWM control
Control mode: voltage vector
Protection level: IP20.
Installation method: wall mounting
Size: approx. 155 x 135 x 82 mm / 6.1 x 5.3 x 3.2 inches.
Package list: 1 x solar photovoltaic DC inverter
1 x English manual.
Note: 1. The default upper limit frequency of this solar photovoltaic inverter is 50Hz, and the reverse function is disabled by default.
2. The DC input voltage should correspond to the recommended voltage as much as possible, otherwise the conversion of solar energy will be reduced.
3. The switches AC input and DC input cannot be closed at the same time, otherwise the inverter or solar panel will be damaged.
4. Do not overload the inverter. If it is not used as required, the motor can also be burned by overheating, and the customer service of the inverter is rejected.