Part of the CoroTurn 107 family of products. CoroTurn 107 is the first choice for external and internal processing of small, long and slim components. Sharp cutting edges and excellent chip control ensure soft cutting behaviour and low cutting forces, which give the component an excellent surface finish. Geometries for high pressure coolants are also available. Product Specification: ADINTMS Adaptive Interface Direction: QS-HP Shaft Coupler, Inch: 1/2 x 1/2 ; B, Shaft Width: 1/2 inch; B, Shank Width: 1/2 inch; BAMS, Machine Side Body Angle: 0 Degree, BAWS, Workpiece Side Body Angle: 0 Degree, BMC, Body Material: Steel, CNSC, Coolant Input. Style Code: 1: Axial Concentric Input; CP, Coolant Pressure: 80 Bars; CP, Coolant Pressure: 1160.3 lbf/in2; CUTINT_Master, Part 2 of Cutting Item Identifications: CCMT 09T308; CXSC, Coolant Outlet; Code: 7: Axial Inclined Focused Output with Nozzle; DPC, Damping Features: 0: GAMO, OrOrOrth Hexagonal rake angle: 0 degrees, H, shaft height: 12.7 mm, H, shaft height: 1.3 cm, hand: R, HF, function height: 12.7 mm, HF, function height: 1.3 cm, KAPR, tool cutting angle: 95 degrees, LAMS, tilt angle: 0 degrees, LF, function length: 70 mm. F Working Length:7.5" 0cm; MIIDM, Master Insert Identification: CCMT 09 T3 08; OHX, Maximum Projection: 21mm; OHX, Maximum Projection: 2.1cm; PSIR, Tool Guide Angle: -5 degrees; RMPX, Maximum Ramping Angle: 0 degrees; TQ, Torque: 3 Nm; TQ, Torque: 0.7 Nm; TQ, Torque: 0. 7 m ong s; W F, function width: 12.7 mm; WF, function width: 1.3 cm; weight: 0.123 kg; weight: 0.1 kg.