Feature

●Multi-layer construction gives true graduated deep filtration; high dirt holding capacity and long service life, provides excellent filtration with low inlet pressure.
●Chemical resistant and made from 100% polypropylene, no additional binders, resins or adhesives.
●85% efficiency at specified nominal micron rating provides first stage filtration for drinking water and prevents the development of microorganisms.
●Complex filter matrix of microfibres and multiple fibre zones capture and retain impurities throughout the sorted depth of the pore structure of the filter.
●Made in the EU from high quality NSF certified materials with FDA CFR title 21 compliance.


Description

Aquafilter Provides FCPS cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its polypropylene filter media, the FCPS series removes solids in a variety of microns, protecting your water flow and improving a continuous supply of fresh and clean drinking water.
Description:
Technical data:
Polypropylene spun sediment cartridge
Made with melt-blown technique. Cartridges are made from 100% pure polypropylene (without any additives).
They remove deposits such as sand, mud, rust and suspended solids.
The products have been tested and certified by the NSF.
They are dedicated to cold water filtration.
Available microns: 1, 5, 10, 20
Operating temperature: 2°C - 80°C.
Durability: 3-6 months (depending on feed water quality).
Filter media: PP.
Micron Rating: 1/5/10/20/50
Length: 256 mm.
Outer diameter: 62 mm.
Inner diameter: 2.8 cm.
Max. Incoming water temperature: 80°C.
Avg. Efficiency: 90%
Water flow: from 20 lpm.