![Centrifugal pump stainless steel 2.1 KW 7.8 bar 10,000 L/h](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Centrifugal pump stainless steel 2.1 kW 7.8 bar 10,000 L/h
Multi-stage centrifugal pump, 6 x stainless steel paddle wheels covered with plastic for good smoothness and robust and rust-proof stainless steel shaft. Delivery head: 78 metres. Max. Pressure: 7.8 bar - Max. Flow rate: 10200 L/h - 170 L/min. The pump must be fused with a slow fuse 16 A. 2.1 KW 230 V / 50 Hz - Protection class: IP 44 - Max. Suction height: 8 m at 1 1/4 inch. The pump must be secured with a slow fuse 16 A. ! Very good smoothness of 68 db, high pressure build up with large flow rate as well as an integrated hot running protection in the motor winding characterise this pump. This pump is only suitable if a check valve or foot valve at the bottom (e.g. for a well/cistern) is present at the base of the suction line. We do not recommend the check valve in front of the pump and advise against purchase. ! Garden irrigation > > max. 4 sprinklers can be connected. ! Please note that we do not recommend PE pipes as suction lines. ! The suction line should have 1-1.25 inches. The cable on the print side or the consumer on the print side should have at least 1 inch. Otherwise, you also need a pressure expansion tank. Cable length plug 80 cm and coupling 50 cm