[3 Stk - 2L]
[3 Stk - 1L]
[2 Stk - 2L]
[2 Stk - 1L]
[1 Stk - 1L]
[1 Stk - 2L]
The cartridge filter is installed in front of the remover (e.g. washing machine) or in front of the pump (for centrifugal pumps). With a very fine mesh width of only 0.15 mm, even the smallest particles are filtered from the water.
The cartridge filter is highly recommended for each pump.
Our tips:
The design of the filter requires a flow direction. Therefore, never mount the filter incorrectly. (A flow direction mark can be found on the cartridge filter).
Box contents:
- 1 piece. Pre-filter 2 litres.
Technical data:
- Max. Flow rate: 5000 l/h.
- Mesh width: 0.15 mm.
- Height: max. 28 cm.
- Filter lid: 15 cm (max. diameter) | filter diameter: max. 13 cm.
- Max. Pressure: 4 bar.
- Connections: 2 x 2.54 cm (1 inch) female (brass) and external thread adapter in plastic.