Code: 70920020000.
Model: Cam 80E.
Energy supply: single phase 240 V 50 Hz.
KW: 0.45.
HP: 0.6.
Pump power: Q l/min: 6.3 ÷ 31.5.
Pump head height: 36 ÷ 15.
Suction side: 3/4 inch.
Print side: 3/4 inch.
Power cable: not provided.
Pump housing: cast iron.
Wheel: brass.
Engine efficiency class: IE2.
CA Self Priming Liquid Ring Pumps
EXECUTION
Self-priming liquid ring pumps with star wheel in block design.
CA: design with pump housing and lantern made of grey cast iron.
B-CA: design with pump housing and lantern in bronze.
(The pumps are completely painted).
Areas of application:
For pure non-explosive liquids, no abrasive components, no suspended substances that do not attack the pump building materials.
For requiring fluids with air or gases or if a short lack of liquid is possible on the suction side.
For water supply when water can be removed from a well or source.
For increasing the printer of the water network (observe local regulations).
Terms of use:
Medium temperature from -10°C to +90°C.
Ambient temperature up to 40°C.
Vacuum metric suction height up to 9 m.
Continuous operation.
MOTOR
2 pin induction motor 50Hz (n = 2900 rpm)
CA: three-phase (three-phase current) 230/400V ±?10%.
CAM: single phase (AC) 230V ±?10% with thermal switch.
Starting capacitor in terminal box.
Insulation class F.
IP 54 rating.
Efficiency class IE2 for three-phase motors of 0.75 kW.
Execution according to EN 60034-1; EN 60034-30; EN 60335-1, EN 60335-2-41.
Special executions on request
Other voltages.
Frequency 60Hz
IP 55 rating.
Other mechanical seal.
Higher or lower medium or ambient temperatures.