Specifications:
Input voltage: AC 220V 50Hz.
Flow rate: 0.6 l/min (~ 7 MPa) - 5 l/min (~ 7 MPa).
Working pressure: 290PSI - 10152PSI (2MPa - 70MPa)
Oil capacity: 7 litres.
Motor power: 750 W.
Motor speed: 1400 rpm.
Machine size: 360 x 280 x 440 mm (14.2 x 11 x 17.3 inches).
N.W. : 26 kg.
Instruction manual:
1. Open the filler neck, electric pump and power connections before oiling, and then press the black button next to the motor to open it. Press the manual operation switch (up). After a few air pressures, press the manual operation switch (down), turn off the motor, connected to the hose. (The pressure should not exceed 63Mpa at air pressure to avoid damage)
2. Open the motor after the pump is connected to the device, and bring the operating valve to the pressurized position after the motor has rotated for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to perform the work, and the output of the hydraulics. The oil rises to 63 MPa with the loading of your own booster.
3. The normal operating temperature of the oil pump is between 10 ℃ ~ 50 ℃, when the oil temperature ≥ 70 ℃ is reached, the use should be discontinued after continuous work under high pressure. Allow the pump to cool before use.
4. The pressure of the relief valve and safety valve has been set before the pump has left the factory. The user cannot arbitrarily increase the pressure, but only reduce according to the actual working pressure, which can improve the life of the pump station.
5. The motor must be reliably grounded.
✔Our products are shipped from German warehouses. DHL transport
✔If any problem, please do not hesitate to contact us. We will serve you within 24 hours.
✔If you are not satisfied with our product, we accept your return and refund you.