[Cbf-f420-alpl]

The gear pump is the power element in the hydraulic system.
Material The pump body is made of special high-strength cast aluminum, and the pump uses high-precision gears, which can minimize deformation even under high pressure.
Features: Simple structure, light weight, high efficiency, low noise, reliable operation.
Application Widely used in hydraulic systems such as automotive, construction machinery, lifting and transport machinery, mining machinery, light industrial machinery and agricultural machinery.

Precautions
1. working medium
Mineral oil based mineral oil with a viscosity range of 10-300 mm2/s can be used. It is recommended to use wear-resistant hydraulic oil no. 46. Do not mix different types of hydraulic oil.
2. Working temperature:
The working temperature range is -20 ~ 100 °C. To extend the life of the pump, it is recommended to use the working temperature in the range of 20 to 80 °C.
3. driver installation
The drive shaft cannot absorb radial and axial pressure.
4. cleanliness
The purity of the system oil must not exceed class 9 (NAS 1638). 5. Pipe connection.
Choose suitable oil lines and connections, avoid hard connections and clean oil lines and connections carefully before assembly.
6. exhaust
Fill the pump with oil before first use and remove the air in the pump and the piping at low pressure and without load. If there is air in the pipeline in the pump, this causes noise and vibrations of the pump and affects the life of the pump.
7. Maintenance
The installation, maintenance and repair of the pump is carried out by professionally trained personnel. The pump must only work in the set area. Always check whether the screws with the prescribed torque