Use:
You can use 3309 series high speed shaft clamps and high speed and high load 3310 series shaft clamps to install and fix this worm gear. The shaft clamp can transfer the torque generated by the gear motor to the output shaft to power the robot. Among these, the high load shaft clamp is the best choice because the clamping length of the high load shaft clamp with 20mm is much longer than the length of other shaft clamps. This greatly increases the contact between multiple shafts and the surface of the center hole, significantly increases clamping force and pressing area, and provides greater support force to withstand heavy radial loads. And there is a clamping screw on each side. The balanced double screw adjustment creates a balanced and firm clamping force on the shaft. To ensure that the rotating components attached to the shaft do not move, slip or loosen.
Specification:
Item Type:Brass Worm
Material: brass.
Model: 4309-0014-0024.
Middle aperture: approx. 14 mm / 0.6 inches.
Number of teeth: 24.
Module: 1.5.
Purpose: motor drive gear
Package list:
1 x brass worm